SILICONE RUBBER MATTING

Silicone rubber mat is physiologically inert, thus making it the preferred choice of medical, pharmaceutical and food processing industries. Silicone have comparatively low mechanical properties, tensile strength, elongation and tear strength, however they keep constant even at high temperatures but should not be used with high- pressure steam. Its resistance to oil and hydrocarbon products is fairly limited and similar to that of Chloroprene rubbers. Reasonable resistance to a whole range of general chemical products, but acids, alkalis, esters and kerosene should be avoided. Silicone has excellent resistance to heat (dry air), at +2000C intermittent. It remains flexible at low temperatures of -700C and it is also resistant to ultra-violent light, Ozone and weathering. Exhibits low inflammability and low smoke toxicity. It has good electrical insulation properties.

Code	Specific Gravity	Hardness (±5)	Tensile Strength	Elongation at break	Compression Set at 700C for 22 hrs	Temp. Range	Colour
	gm / cm3	Shore A	(min) kg / cm2	(min) %	%	0C
SI 60117	1.16	61	80	300	40	-60 to +226	Blue Food Grade
SI 60120 T	1.20	60	100	250	40	-60 to +225	Translucent
SI 50120	1.20	50	90	250	40	-90 to +200	Translucent
SI 60120	1.20	60	60	250	40	-90 to +200	Red / White
SI 60130	1.30	60	60	200	45	-70 to +200	Brick Red
SI 70130	1.30	70	60	200	45	-50 to +200	Red
SI 65130	1.35	65	50	150	45	-50 to +175	Brick Red

Standard Length	10 Mtr	33 Ft	11 Yard
Standard Width	1.2/1.4/1.5 Mtr	4/4.6/4.92	1.33/1.53/1.64 Yard

Note	1). One side or both side smooth or fabric finish can be supplied.
	2). Specifications are subject to change without notice.